How To Make A Led Circuit With Switch - Wiring Draw And Schematic

Do you want to make a LED circuit with switch but have no idea how to do it? If so, you’ve come to the right place. In this article, we’ll take you through the steps of how to make a LED circuit with switch. We’ll also give you some tips on how to troubleshoot any issues that may arise. So, if you’re ready to get started, let’s jump right in!

The first thing that you need to do is gather all of your supplies. You will need a breadboard, a 12-volt source, a resistor, and a switch. Additionally, you will need two LEDs and a few connecting wires. Before you start working, make sure to double-check that each component is connected in the correct manner.

Now that you have all of your supplies, it’s time to start making your circuit. Start by inserting the switch onto the breadboard and then connect one of the LEDs to the switch. Now, connect the other LED to the other side of the switch. Ensure that the orientation of the LEDs is correct. Next, connect the resistor to the ground and then connect the 12-volt source to the 12-volt side of the switch. Finally, connect the other end of the resistor to the LEDs.

Once the circuit is connected, it’s time to test it out. When you press the switch, the LEDs should light up. If the LEDs don’t light up, try flipping the orientation of the LEDs. If the LEDs still don’t turn on, double-check all of your connections for accuracy.

Now that you know how to make a LED circuit with switch, you can experiment with different types of circuits and components. With enough practice, you’ll be able to create more advanced circuits. Good luck!

On And Switch Basics Sparkfun Learn