Orbit Sprinkler Timer Wiring Diagram - Wiring Draw And Schematic

Having a properly wired Orbit sprinkler timer is essential for keeping your lawn healthy and looking its best. With a few simple steps, you can get your system running in no time. To help you out, we’ve put together this detailed guide to wiring your Orbit sprinkler timer.

Before you start the wiring process, familiarize yourself with the components of the Orbit sprinkler timer. The box should contain a timer, a transformer, and two wires. The timer will have four terminals: a common (COM), one for the power in (PWR IN), one for the power out (PWR OUT), and one for the ground (GND). It should also come with instructions on how to wire it.

Now that you’re familiar with the components, it’s time to start wiring. First, attach the transformer to the timer. This is done by connecting the black wire from the transformer to the PWR IN terminal on the timer, the red wire to the PWR OUT terminal, and the green wire to the GND terminal. Make sure to firmly tighten the terminal screws to ensure a secure connection.

Next, connect the two remaining wires to the timer. The black wire goes to the COM terminal and the white wire to the PWR OUT terminal. Once again, make sure to firmly tighten the terminal screws. Now you’re ready to plug the timer into an electrical outlet.

Finally, you’ll need to connect the timer to the sprinkler system. This should be done using a standard irrigation control wire. Connect one end of the wire to the PWR OUT terminal of the timer and the other end to the sprinkler control valve. Make sure to firmly tighten the terminal screws.

You’ve now successfully wired your Orbit sprinkler timer. Following these simple steps will ensure that you get the most out of your sprinkler system and keep your lawn looking its best. With proper installation, you can enjoy worry-free lawn care for many years to come.

Rain Sensor Installation Gen 2 Spruce Support